Search the EVE Online Item Database
Propulsion Subsystem Group
Legion Propulsion - Intercalated Nanofibers
| typeID | 45611 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Legion Propulsion - Intercalated Nanofibers Blueprint |
| Description | Constructed from hard yet lightweight fullerene polymers, these intercalated fibers boost the speed and agility of a starship without compromising its structural resilience. Even though basic nanofibers have existed for hundreds of years, the integration of various Sleeper-based salvage and other polymers takes the technology to a completely new level of modularity. This has allowed the same centuries-old technology to be ported over to the new Tech III paradigm. |
Legion Propulsion - Interdiction Nullifier
| typeID | 45610 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Legion Propulsion - Interdiction Nullifier Blueprint |
| Description | Dubbed the “interdiction nullifier” by the Guristas, who suffered its first introduction on the battlefield, this subsystem integrates and improves the performance of interdiction nullifier modules. The origins of the first “nullifier” designs are shrouded in mystery, but the subsystem's initial production of is thought to have taken place soon after the wormhole openings, and well before the technology became widespread knowledge. Not long after the first Tengu were designed, the Caldari Navy intercepted emergency transmissions from Guristas fleets across Venal, Tenal and Vale of the Silent. All of the reports made mention of Loki-class vessels slipping past defensive deployments and into core Guristas territory despite all efforts to stop the ships or slow them down. Following these reports, rumors spread that other groups began to discover and implement this extraordinary new technology, and yet of all the factions that leapt upon the opportunity, none were so eager or ruthless in their own race to capitalize as the independent capsuleer and pirate organizations that make the nullsec frontiers their home. |
Legion Propulsion - Wake Limiter
| typeID | 45612 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Legion Propulsion - Wake Limiter Blueprint |
| Description | This subsystem limits the wake left behind by a starship's afterburner or microwarpdrive, allowing a pilot to maintain a lowered signature radius while still moving at high speed. The underlying design is based on the same technology used by smaller Sleeper drones and empire-produced Interceptors. Although the engineering processes behind wake limiters have existed for quite some time in the empires, their application in modular subsystems has only become a possibility after fullerene polymers became more widely available. |
Loki Propulsion - Intercalated Nanofibers
| typeID | 45620 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Loki Propulsion - Intercalated Nanofibers Blueprint |
| Description | Constructed from hard yet lightweight fullerene polymers, these intercalated fibers boost the speed and agility of a starship without compromising its structural resilience. Even though basic nanofibers have existed for hundreds of years, the integration of various Sleeper-based salvage and other polymers takes the technology to a completely new level of modularity. This has allowed the same centuries-old technology to be ported over to the new Tech III paradigm. |
Loki Propulsion - Interdiction Nullifier
| typeID | 45619 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Loki Propulsion - Interdiction Nullifier Blueprint |
| Description | Dubbed the “interdiction nullifier” by the Guristas, who suffered its first introduction on the battlefield, this subsystem integrates and improves the performance of interdiction nullifier modules. The origins of the first “nullifier” designs are shrouded in mystery, but the subsystem's initial production of is thought to have taken place soon after the wormhole openings, and well before the technology became widespread knowledge. Not long after the first Tengu were designed, the Caldari Navy intercepted emergency transmissions from Guristas fleets across Venal, Tenal and Vale of the Silent. All of the reports made mention of Loki-class vessels slipping past defensive deployments and into core Guristas territory despite all efforts to stop the ships or slow them down. Following these reports, rumors spread that other groups began to discover and implement this extraordinary new technology, and yet of all the factions that leapt upon the opportunity, none were so eager or ruthless in their own race to capitalize as the independent capsuleer and pirate organizations that make the nullsec frontiers their home. |
Advertisement · Continue Reading Below
Loki Propulsion - Wake Limiter
| typeID | 45621 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Loki Propulsion - Wake Limiter Blueprint |
| Description | This subsystem limits the wake left behind by a starship's microwarpdrive, allowing a pilot to maintain a lowered signature radius while still moving at high speed. The underlying design is based on the same technology used by smaller Sleeper drones and empire-produced Interceptors. Although the engineering processes behind wake limiters have existed for quite some time in the empires, their application in modular subsystems has only become a possibility after fullerene polymers became more widely available. |
Proteus Propulsion - Hyperspatial Optimization
| typeID | 45617 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Proteus Propulsion - Hyperspatial Optimization Blueprint |
| Description | This subsystem improves the agility and warp speed of a Proteus-class Strategic Cruiser. With the influx of fullerene-based polymers and the discovery of Sleeper drone technology, the same fundamental principles once only sparingly employed in advance scout vessels such as Covert Ops and Interceptors could be re-applied to modular Tech III vessels. Although the Caldari claim to have been the first to successfully reverse-engineer these subsystems, the Federation argues that they were the first to deliver the breakthrough. Despite the contention, neither party seems keen to publicize the research data necessary to back their respective claims. |
Proteus Propulsion - Interdiction Nullifier
| typeID | 45616 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Proteus Propulsion - Interdiction Nullifier Blueprint |
| Description | Dubbed the “interdiction nullifier” by the Guristas, who suffered its first introduction on the battlefield, this subsystem integrates and improves the performance of interdiction nullifier modules. The origins of the first “nullifier” designs are shrouded in mystery, but the subsystem's initial production of is thought to have taken place soon after the wormhole openings, and well before the technology became widespread knowledge. Not long after the first Tengu were designed, the Caldari Navy intercepted emergency transmissions from Guristas fleets across Venal, Tenal and Vale of the Silent. All of the reports made mention of Loki-class vessels slipping past defensive deployments and into core Guristas territory despite all efforts to stop the ships or slow them down. Following these reports, rumors spread that other groups began to discover and implement this extraordinary new technology, and yet of all the factions that leapt upon the opportunity, none were so eager or ruthless in their own race to capitalize as the independent capsuleer and pirate organizations that make the nullsec frontiers their home. |
Advertisement · Continue Reading Below
Proteus Propulsion - Localized Injectors
| typeID | 45618 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Proteus Propulsion - Localized Injectors Blueprint |
| Description | This subsystem uses molecular-level nanotubes to increase the combustive efficiency of afterburners and microwarpdrives. Fuel is injected locally in a far more effective and controllable manner, thereby reducing the draw on the capacitor system and increasing heat tolerances during active operation. |
Tengu Propulsion - Chassis Optimization
| typeID | 45614 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Tengu Propulsion - Chassis Optimization Blueprint |
| Description | This subsystem exploits the latest technological advances afforded by discovery of the ancient Sleeper race's own designs. Optimizations made to the chassis allow for vast improvements to be made to a Tengu's agility and base velocity. Although the various layout optimizations sacrifice other options for propulsion customization, the flow-on effects from an improvement in base agility make it an attractive upgrade for those whose Tech III vessels are in need of an overall mobility increase. |
Advertisement · Continue Reading Below
Tengu Propulsion - Fuel Catalyst
| typeID | 45615 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Tengu Propulsion - Fuel Catalyst Blueprint |
| Description | The ancient Sleeper race was known to have mastered various sustainable energy technologies including thermoelectric systems, which they usually built directly into a vessel's hull. Capsuleer reverse-engineers took little time to adapt salvaged versions of these Sleeper energy systems into their own modular Tech III vessel pieces. Thanks to widespread demand in the Caldari transport industry, fuel catalyst systems were one of the first to be developed. Making full use of locally generated thermoelectric power, they are able to supplement the fuel needs of an afterburner. This process makes it possible to inject fuel in larger amounts for the same capacitor cost, offering pilots a significant boost to the velocity increase from afterburners. |
Tengu Propulsion - Interdiction Nullifier
| typeID | 45613 |
| Mass | 1,400,000.00 kg |
| Volume | 40.00 m³ |
| Category | Propulsion Subsystem |
| Produced By | Tengu Propulsion - Interdiction Nullifier Blueprint |
| Description | Dubbed the “interdiction nullifier” by the Guristas, who suffered its first introduction on the battlefield, this subsystem integrates and improves the performance of interdiction nullifier modules. The origins of the first “nullifier” designs are shrouded in mystery, but the subsystem's initial production of is thought to have taken place soon after the wormhole openings, and well before the technology became widespread knowledge. Not long after the first Tengu were designed, the Caldari Navy intercepted emergency transmissions from Guristas fleets across Venal, Tenal and Vale of the Silent. All of the reports made mention of Loki-class vessels slipping past defensive deployments and into core Guristas territory despite all efforts to stop the ships or slow them down. Following these reports, rumors spread that other groups began to discover and implement this extraordinary new technology, and yet of all the factions that leapt upon the opportunity, none were so eager or ruthless in their own race to capitalize as the independent capsuleer and pirate organizations that make the nullsec frontiers their home. |